| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
58-75GHz WR-15 WAVEGUIDE ORTHOGONAL COUPLER
Connect the common port to the antenna feed –
The common port of a "WAVEGUIDE DUPLEXER" connects to the antenna horn or the common waveguide section.
Connect the two output ports to the respective polarization channels –
One output port of a "WAVEGUIDE DUPLEXER" carries the vertical polarization (V-pol), and the other carries the horizontal polarization (H-pol).
Verify port alignment and flange orientation –
The alignment of the common-arm flange is critical for a "WAVEGUIDE DUPLEXER"; misalignment excites unwanted higher-order modes and degrades isolation.
Millimeter-wave and submillimeter-wave receivers –
A "WAVEGUIDE DUPLEXER" based on dual-ridged waveguide topology is used in ALMA Band 6 and other high-frequency radio telescope receivers.
Antenna measurement ranges –
A "WAVEGUIDE DUPLEXER" separates the two polarization components for independent characterization of antenna polarization purity.
Communications payloads on satellites –
A "WAVEGUIDE DUPLEXER" feeds a single reflector antenna with two orthogonally polarized signals, one for each polarization channel.
| Part Number | VN-WGOMT-5875-WR15-C4.191 |
| Operating Frequency ( GHz ) | 58-75 |
| Public Port | 4.191/ 0.165 (Circular wave port) |
| Insertion Loss(dB) | ≤1.0dB |
| VSWR | 1.50:1 |
| Isolation | ≥30dB |
| Interface | WR15(BJ620) |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()
![]()
| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
58-75GHz WR-15 WAVEGUIDE ORTHOGONAL COUPLER
Connect the common port to the antenna feed –
The common port of a "WAVEGUIDE DUPLEXER" connects to the antenna horn or the common waveguide section.
Connect the two output ports to the respective polarization channels –
One output port of a "WAVEGUIDE DUPLEXER" carries the vertical polarization (V-pol), and the other carries the horizontal polarization (H-pol).
Verify port alignment and flange orientation –
The alignment of the common-arm flange is critical for a "WAVEGUIDE DUPLEXER"; misalignment excites unwanted higher-order modes and degrades isolation.
Millimeter-wave and submillimeter-wave receivers –
A "WAVEGUIDE DUPLEXER" based on dual-ridged waveguide topology is used in ALMA Band 6 and other high-frequency radio telescope receivers.
Antenna measurement ranges –
A "WAVEGUIDE DUPLEXER" separates the two polarization components for independent characterization of antenna polarization purity.
Communications payloads on satellites –
A "WAVEGUIDE DUPLEXER" feeds a single reflector antenna with two orthogonally polarized signals, one for each polarization channel.
| Part Number | VN-WGOMT-5875-WR15-C4.191 |
| Operating Frequency ( GHz ) | 58-75 |
| Public Port | 4.191/ 0.165 (Circular wave port) |
| Insertion Loss(dB) | ≤1.0dB |
| VSWR | 1.50:1 |
| Isolation | ≥30dB |
| Interface | WR15(BJ620) |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()
![]()