| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
60-90GHz WR-12 WAVEGUIDE ORTHOGONAL COUPLER
Connect the two output ports to the respective polarization channels –
One output port of a "WAVEGUIDE DUPLEXER" carries the vertical polarization (V-pol), and the other carries the horizontal polarization (H-pol).
Verify port alignment and flange orientation –
The alignment of the common-arm flange is critical for a "WAVEGUIDE DUPLEXER"; misalignment excites unwanted higher-order modes and degrades isolation.
Match flange types –
A "WAVEGUIDE DUPLEXER" requires compatible flanges on all ports to ensure proper electrical contact and mechanical alignment.
A "WAVEGUIDE DUPLEXER" based on the Bøifot junction architecture uses a septum and matching pins to provide a broadband match for both polarizations. A "WAVEGUIDE DUPLEXER" operates reciprocally: it can separate two polarizations received from an antenna, or it can combine two orthogonally polarized transmit signals into a single common port.
Millimeter-wave and submillimeter-wave receivers –
A "WAVEGUIDE DUPLEXER" based on dual-ridged waveguide topology is used in ALMA Band 6 and other high-frequency radio telescope receivers.
Antenna measurement ranges –
A "WAVEGUIDE DUPLEXER" separates the two polarization components for independent characterization of antenna polarization purity.
| Part Number | VN-WGOMT-6090-WR12-S3.099 |
| Operating Frequency ( GHz ) | 60-90 |
| Public Port | 3.099mm (Square wave port) |
| Insertion Loss(dB) | ≤0.8dB |
| VSWR | 1.50:1 |
| Isolation | ≥35dB |
| Interface | WR12(BJ740) |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()
![]()
| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
60-90GHz WR-12 WAVEGUIDE ORTHOGONAL COUPLER
Connect the two output ports to the respective polarization channels –
One output port of a "WAVEGUIDE DUPLEXER" carries the vertical polarization (V-pol), and the other carries the horizontal polarization (H-pol).
Verify port alignment and flange orientation –
The alignment of the common-arm flange is critical for a "WAVEGUIDE DUPLEXER"; misalignment excites unwanted higher-order modes and degrades isolation.
Match flange types –
A "WAVEGUIDE DUPLEXER" requires compatible flanges on all ports to ensure proper electrical contact and mechanical alignment.
A "WAVEGUIDE DUPLEXER" based on the Bøifot junction architecture uses a septum and matching pins to provide a broadband match for both polarizations. A "WAVEGUIDE DUPLEXER" operates reciprocally: it can separate two polarizations received from an antenna, or it can combine two orthogonally polarized transmit signals into a single common port.
Millimeter-wave and submillimeter-wave receivers –
A "WAVEGUIDE DUPLEXER" based on dual-ridged waveguide topology is used in ALMA Band 6 and other high-frequency radio telescope receivers.
Antenna measurement ranges –
A "WAVEGUIDE DUPLEXER" separates the two polarization components for independent characterization of antenna polarization purity.
| Part Number | VN-WGOMT-6090-WR12-S3.099 |
| Operating Frequency ( GHz ) | 60-90 |
| Public Port | 3.099mm (Square wave port) |
| Insertion Loss(dB) | ≤0.8dB |
| VSWR | 1.50:1 |
| Isolation | ≥35dB |
| Interface | WR12(BJ740) |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()
![]()