| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
2.6-3.95GHz WR-284 WAVEGUIDE COACIAL ADAPTER
A WAVEGUIDE COACIAL ADAPTER is a passive transition device that converts the transverse electromagnetic (TEM) mode propagating in a coaxial line into the TE10 mode propagating in a rectangular waveguide, and vice versa. A WAVEGUIDE COACIAL ADAPTER achieves this mode conversion through a metallic probe that extends from the coaxial center conductor into the waveguide cavity. A WAVEGUIDE COACIAL ADAPTER uses the probe to couple electromagnetic energy between the two transmission media, with the probe's length, position, and geometry optimized to minimize reflections. A WAVEGUIDE COACIAL ADAPTER often incorporates multi-step impedance transformation structures or ridge waveguide sections to achieve broadband impedance matching between the high-impedance waveguide and the low-impedance coaxial line (typically 50 ohms). A WAVEGUIDE COACIAL ADAPTER may include a choke mechanism—a quarter-wavelength groove—to prevent RF leakage and arcing at high power levels. A WAVEGUIDE COACIAL ADAPTER is reciprocal: it performs the same conversion function regardless of whether the signal enters from the coaxial side or the waveguide side.
| Part Number | VN-WGCA-0203-WR284-E-NF |
| Operating Frequency ( GHz ) | 2.6-3.95 |
| VSWR | 1.25:1 |
| Connection | N-50K |
| Interface | WR284(BJ32) |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()
| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
2.6-3.95GHz WR-284 WAVEGUIDE COACIAL ADAPTER
A WAVEGUIDE COACIAL ADAPTER is a passive transition device that converts the transverse electromagnetic (TEM) mode propagating in a coaxial line into the TE10 mode propagating in a rectangular waveguide, and vice versa. A WAVEGUIDE COACIAL ADAPTER achieves this mode conversion through a metallic probe that extends from the coaxial center conductor into the waveguide cavity. A WAVEGUIDE COACIAL ADAPTER uses the probe to couple electromagnetic energy between the two transmission media, with the probe's length, position, and geometry optimized to minimize reflections. A WAVEGUIDE COACIAL ADAPTER often incorporates multi-step impedance transformation structures or ridge waveguide sections to achieve broadband impedance matching between the high-impedance waveguide and the low-impedance coaxial line (typically 50 ohms). A WAVEGUIDE COACIAL ADAPTER may include a choke mechanism—a quarter-wavelength groove—to prevent RF leakage and arcing at high power levels. A WAVEGUIDE COACIAL ADAPTER is reciprocal: it performs the same conversion function regardless of whether the signal enters from the coaxial side or the waveguide side.
| Part Number | VN-WGCA-0203-WR284-E-NF |
| Operating Frequency ( GHz ) | 2.6-3.95 |
| VSWR | 1.25:1 |
| Connection | N-50K |
| Interface | WR284(BJ32) |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()