| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
60-90GHz WR-12 WAVEGUIDE COACIAL ADAPTER
Microwave test benches –
A WAVEGUIDE COACIAL ADAPTER is used to inject or extract signals from waveguide test setups using standard coaxial instrumentation.
High-power transmitter systems –
A WAVEGUIDE COACIAL ADAPTER with choke joint construction handles kilowatt-level average power where coaxial cables alone would fail due to center conductor heating.
Millimeter-wave research –
A WAVEGUIDE COACIAL ADAPTER enables the connection of millimeter-wave waveguide components (e.g., WR-28, WR-10) to coaxial measurement equipment.
Antenna range measurements –
A WAVEGUIDE COACIAL ADAPTER provides a convenient coaxial interface at the antenna under test while preserving the waveguide feed.
Torque the coaxial connection properly –A WAVEGUIDE COACIAL ADAPTER should be mated with the specified torque to ensure reliable electrical contact and prevent damage to the precision connector.
Check VSWR and insertion loss –A properly functioning WAVEGUIDE COACIAL ADAPTER should exhibit VSWR typically below 1.2:1 and insertion loss below 0.3 dB across its specified band.
| Part Number | VN-WGCA-6090-WR12-E-1.0F |
| Operating Frequency ( GHz ) | 60-90 |
| Insertion Loss(dB) | 1.0 |
| VSWR | 1.50:1 |
| Connection | 1.0mm-50K |
| Interface | WR12(BJ740) |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()
| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
60-90GHz WR-12 WAVEGUIDE COACIAL ADAPTER
Microwave test benches –
A WAVEGUIDE COACIAL ADAPTER is used to inject or extract signals from waveguide test setups using standard coaxial instrumentation.
High-power transmitter systems –
A WAVEGUIDE COACIAL ADAPTER with choke joint construction handles kilowatt-level average power where coaxial cables alone would fail due to center conductor heating.
Millimeter-wave research –
A WAVEGUIDE COACIAL ADAPTER enables the connection of millimeter-wave waveguide components (e.g., WR-28, WR-10) to coaxial measurement equipment.
Antenna range measurements –
A WAVEGUIDE COACIAL ADAPTER provides a convenient coaxial interface at the antenna under test while preserving the waveguide feed.
Torque the coaxial connection properly –A WAVEGUIDE COACIAL ADAPTER should be mated with the specified torque to ensure reliable electrical contact and prevent damage to the precision connector.
Check VSWR and insertion loss –A properly functioning WAVEGUIDE COACIAL ADAPTER should exhibit VSWR typically below 1.2:1 and insertion loss below 0.3 dB across its specified band.
| Part Number | VN-WGCA-6090-WR12-E-1.0F |
| Operating Frequency ( GHz ) | 60-90 |
| Insertion Loss(dB) | 1.0 |
| VSWR | 1.50:1 |
| Connection | 1.0mm-50K |
| Interface | WR12(BJ740) |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()