| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
6.5-18GHz WRD650 WAVEGUIDE COACIAL ADAPTER
Identify the waveguide interface and coaxial connector –
A WAVEGUIDE COACIAL ADAPTER has a double-ridge waveguide flange (e.g., FPWRD series) on one end and a coaxial connector (e.g., N-type, SMA, or DIN 7/16) on the other.
Match the waveguide flange type –
A WAVEGUIDE COACIAL ADAPTER requires the correct double-ridge flange (e.g., FPWRD500D36 for WRD500) to mate with the waveguide run.
Verify frequency range –
A WAVEGUIDE COACIAL ADAPTER is designed for a specific double-ridge band (e.g., WRD500 for 5.0–18.0 GHz, WRD350 for 3.5–8.2 GHz); operation outside this band degrades VSWR and insertion loss.
Connect the coaxial side –
Attach the coaxial connector of the WAVEGUIDE COACIAL ADAPTER to the test equipment, cable, or coaxial component with the appropriate mating interface.
Check power handling –
A WAVEGUIDE COACIAL ADAPTER has model-specific power ratings; high-power versions can handle up to 1000 W average (e.g., WRD840 with DIN 7/16), while smaller connectors like SMA are limited to lower power.
| Part Number | VN-DRWGCA-0618-WRD650-E-SF |
| Operating Frequency ( GHz ) | 6.5-18 |
| VSWR | 1.40:1 |
| Connection | SMA-50K |
| Interface | WRD650 |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()
| MOQ: | 5 pcs |
| Price: | negotiable |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 500 |
6.5-18GHz WRD650 WAVEGUIDE COACIAL ADAPTER
Identify the waveguide interface and coaxial connector –
A WAVEGUIDE COACIAL ADAPTER has a double-ridge waveguide flange (e.g., FPWRD series) on one end and a coaxial connector (e.g., N-type, SMA, or DIN 7/16) on the other.
Match the waveguide flange type –
A WAVEGUIDE COACIAL ADAPTER requires the correct double-ridge flange (e.g., FPWRD500D36 for WRD500) to mate with the waveguide run.
Verify frequency range –
A WAVEGUIDE COACIAL ADAPTER is designed for a specific double-ridge band (e.g., WRD500 for 5.0–18.0 GHz, WRD350 for 3.5–8.2 GHz); operation outside this band degrades VSWR and insertion loss.
Connect the coaxial side –
Attach the coaxial connector of the WAVEGUIDE COACIAL ADAPTER to the test equipment, cable, or coaxial component with the appropriate mating interface.
Check power handling –
A WAVEGUIDE COACIAL ADAPTER has model-specific power ratings; high-power versions can handle up to 1000 W average (e.g., WRD840 with DIN 7/16), while smaller connectors like SMA are limited to lower power.
| Part Number | VN-DRWGCA-0618-WRD650-E-SF |
| Operating Frequency ( GHz ) | 6.5-18 |
| VSWR | 1.40:1 |
| Connection | SMA-50K |
| Interface | WRD650 |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Dimension(mm) | As below |
| ROHS Compliance | Yes |
![]()
![]()